PRODUCTS

24 Port SFP-based 100Mbit Switch

 

 

About the Product

The PBN AOCM3000 series switching products provide high-performance and low-cost point-to-point FTTx aggregation switches with an extensive feature set. With their wire-speed switching capabilities these devices can be used in remote headends as well as in a central headend aggregation deployment scenario. Fully integrated into the PBN network management system, we support rapid deployments to improve time-to-market for green-fields as well as existing operators.

The AOCM3424 SFP-based switch is ideal for connecting residential and business subscribers with speeds up to 100 Mbit/sec. A full set of QoS and security features allows operators to guarantee service levels for both connectivity and bandwidth. Tightly embedded in the PBN FTTx solutions product lines, this switch can be used in conjunction with our CATV overlay products and triple-play fiber-access gateway products.

 

This switch is an excellent fit for small deployment scenarios or start-up operations as it also supports L3 routing protocols, which allow direct connection to your uplink internet service partner. With its clustering and cascading technology, this device allows you to easily expand as you grow without large up-front investments.

 

Typical Application Diagram for AOCM3000-series Switches

Centralized Triple-Play deployment with subscriber lines terminating in central headend location

 

Decentralized Triple-Play deployment with subscriber lines terminating in a remote location. Uplink via multiple redundant 1GigE links from AOCM3424 to AOCM6000-series chassis (also possible to AOCM3924).

 

 

Key Features

Performance

• 36 Gbps backplane bandwidth, hardware routing and wire-speed L3 packet-forwarding rate
  (13.1 Mpps)
• High port density and a maximum of 24 x 100M SFP ports + 2 x 10/100/1000TX + 2 x 10/100/1000TX/Gigabit SFP combo ports
• SFP-based Gigabit optical-fiber supports up to 80 km long-distance connections

High security and reliability

• Provides multiple user-authentication modes such as 802.1x or HTTP authentication
• Powerful ACL and hardware, supporting L2 to L7 data filtration
• Active RPS power source backup, which increases system reliabilityIntelligent forwarding policy, which fully prevents red-code virus and shockwave virus
• QinQ and double VLAN security

Flexible management mode

• Automatically identifies straight-through and crossover cables (MDI / MDI-X)
• Adopts cluster technology; supports device cascading; dedicated management through a unique IP address
• Open management access including Console port, Telnet, Web and SNMP
• Integrated into PBN’s NMSE Network Management System

Powerful flow and broadcast management

• Automatically detects and limits broadcast storms; supports IGMP snooping to limit broadcast flooding

• Supports flow control in full- or half-duplex mode
• Rate limitation in steps of 64K is supported on the Ethernet interface
  
• Supports IP multicast and QoS

L3 routing protocols

• Supports static routing
• Supports RIP v1/v2, OSPF v2, BEIGRP, BGP v4, etc.
• Supports multicast routing protocols such as PIM-SM and PIM-DM